Smart Navigator 2.0
Intelligent fault detection
The proven overcurrent detection alogrithm detects fault currents reliably under a wide range of network situations. Individual parameter settings tailor the Smart Navigator 2.0 perfectly for all locations in your overhead line network, eliminating false tripping.
Whenever a fault is detected, besides the fault information, also all monitoring data is signalled to the control room – this gives full visibility into the network condition before and after the fault occurred.
Fault messages containing information about fault direction, voltage interruption, current drop and increase in conductor temperature support the problem detection and root cause identification. Every fault is signalled to the control room within 1 minute.
The Smart Navigator 2.0 harvests the energy for its power supply from the overhead line current. Thanks to dynamic adaptation of its operation to load conditions, a load current of 5 Amps suffices.
Remote signalling and monitoring
Thanks to remote signalling, the complex, high-quality and diverse sensor technology enables clear monitoring and thus direct insight into your overhead line network. Sections containing decentralized feed-in points are clearly identified by the remotely reported load flow direction.
Remote maintenance such as software updates or configuration adjustments can be performed via the GSM / LTE connection.
The overhead line conductor temperature is measured and remotely reported, enabling optimal load control by the control room.
Thanks to the innovative clamping mechanism, unintentional detaching from the overhead line due to environmental influences is impossible.
With a hot stick, the Smart Navigator 2.0 can be mounted on an overhead line up to 12 meters high, even under live conditions. Likewise, it also can be uninstalled again without any problems.
- Intelligent fault detection – reduces outage times
- Overhead line monitoring – data for the evaluation of the network condition
- Energy Harvesting – simply clipped onto a phase conductor of the overhead line
- Innovative installation - on live conductors and from the ground
- Remote maintenance – configuration and updates from the control room
|Short-circuit trip current|
Max. 1,200 A
|Response delay short-circuit||-|
|Peak load memory||-|
|Indication (short-circuit/earth fault)|
Ultra bright LEDs
|Automatic time reset|
|Reset on current restoration|
>3 A load current
|Reset on voltage restoration|
≥5 kV line voltage
|Current measurement accuracy|
±2 A (0 – 10 A)
3 % (10 – 600 A)
5 % (>600 A)
Different algorithms for fault detection
|Max. permissible voltage|
≤69 kV (L-L)
800 A (@ ≤50 °C)
600 A (@ ≥50 °C)
25 kA/3 s
40 kA/1 s
Fault current magnitude and duration
Loss of current or voltage
DNP3, HTTP, HTTPs, FTP
Private APN , public APN
iHost Cloud for quick system integration
Direct connection to the control room
Individual server solution
(installation on live conductors)
With two Smart Navigator 2.0 Satellites
UV resistant polycarbonate, IP65
|Temperature range||-40 to +85 °C (-20 to +60 °C for devices with oder no. 44-10xx-xxx)|
Up to 33 mm
- Current sensor with energy harvesting
- Integrated modem for remote signalling
- Bright LEDs
- Easily accessible battery compartment