Rotor indicator
Mechanical short-circuit indicators
The rotor indicator is a mechanical short-circuit indicator and is used to detect short-circuit currents in medium-voltage networks. The indicator is triggered by a magnetic field strength H, which is measured at response values I >> is induced. The two-color indicator of the rotatable rotor with reset pin shows the respective status of the rotor system. Here, “black” means that the indicator has not responded and “red” means that the indicator has responded.
Product features
- Mechanical
- Mounting on cable or rail
- Display via rotatable rotor
- Can be retrofitted
Your added value
- Universally applicable
- Fault localization possible after reconnection
- Maintenance-free, no battery
Technical data
| Rotor indicator | |
|---|---|
| Short-circuit indicator | ✅ |
| Earth fault location method | Earth short circuit |
| I>> Response values Short-circuit current |
150 – 2,000 A (adjustable in the factory) |
| tI>> Response delay | 100 ms at nominal response value |
| Response tolerance | ±10 % |
| Reset | Manual with operating rod |
| Housing | Housing and housing fastening screws made of polyamide, yoke made of ferromagnetic steel |
| Temperature range | -30 °C to +70 °C |
All important documents for the device
Do you need additional information about our device? In our download area you will find all relevant documents such as brochures and product catalogs, technical reports, operating instructions and dimensional drawings (login required). Simply click on the download area to obtain the documents you require.
Matching articles
PERFECT MATCH
Here you will find the matching equipment set and accessories for this item. All components are technically matched to each other and guarantee optimum functionality. For customer-specific requirements and individual offers, please contact our sales department.
Equipment set
- 1 Rotor indicator
Product finder
Find the right Horstmann product for your application quickly and easily.
Other short-circuit and earth fault indicators
ComPass A 2.0
- Load current monitoring
- Detection of earth faults and short circuits for NOSPE/ KNOSPE networks
- Error display without direction indication
ComPass B
- Highly accurate monitoring
- Detection of earth faults and short circuits for all networks
- Remote signaling via RS485 / Modbus interface
ComPass B 2.0
- Highly accurate monitoring
- Detection of earth faults and short circuits for all networks
- Error direction display
ComPass Bs 2.0
- Fault direction indicator with monitoring
- Detection of earth faults and short circuits for all networks
- Switching ComPass Bs 2.0 for controlling a switch-disconnector or circuit-breaker remotely